Fingerprint Development Chamber & Ovens

All models are equipped with a horizontal air flow system for uniform temperature and RH. Features an over-temperature safety control, vapor generator, auto water level control, and interior drain. Powder-coated paint on the sides, back and top. Door and front are stainless steel. Use of distilled water is recommended. Microprocessor controls maintain temperature and humidity in approximate ranges of 35°C-85°C and 40%-95%, respectively. A low-pressure water vapor generator controls chamber humidification by injecting saturated water vapor into the recirculating air duct. This process is preferable to steam generation because steam introduces additional heat to the chamber atmosphere, which compromises temperature control. > More

• Uses tap water for economy and ease of installation
• DI cartridge & carbon filter removes corrosive imputities
• Ionic Silver Stick anti-bacterial action
• Monitoring of the water level
• Replace Filters indicator light
• Quick access to filters and servicing
• Handles & casters for easy moving
• Optional UV germicidal lamp > More

Optimal temperature uniformity and recovery are provided through turbo blower-assisted, one-pass air flow without temperature over-shoot. Alter drying time by adjusting air volume passing through the oven. Controller will retain temperature and time in the event that power is lost. A builtin over temperature safety is independent from the main controller. LED temperature display. Insulated with heavyduty, fully adjustable door latch and hinges. Wrap around insulation for even heat retention. Highly resistant, durable powder-coat paint finish. > More

With Stainless steel shelves and interior, the wide temperature and humidity range allows fingerprints to be processed in just a matter of minutes - not days like some conventional methods. Microprocessor based PID controllers maintain excellent stability and provide reliable and repeatable results. The gentle, forced, vertical airflow provides uniform environmental conditions, eliminates condensation, and keeps evidence moisture free.  > More

Protector Downdraft Powder Stations keep users safe by containing powders during fingerprint processing. The opensided, open-top work station provides unrestricted operator movement and accommodates oversized evidence. Available in 2’ and 3’ widths, two or more Stations may be placed side-by-side to achieve an unlimited number of width combinations.An optional Transition Connector mounts between two Stations for a secure fit and continuous work surface.

• Open-sided, open-top design
 > More