Centrifuges

• For microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes
• Interchangeable rotors & adaptors for microtubes and strip tubes
• Small & compact with only 6” bench space needed
• On/off switch or convenient start & stop by opening & closing lid
• Starts and stops in seconds > More

• Easy access rotor
• Digital microprocessor that precisely regulates operation
• Parameters are selected with two “smart” knobs
• Values are shown on easy to read, LED displays
• Speed can be set and displayed in rpm or g-force
• Runs may be timed, continuous or momentary
• 24-place rotor allows easy access to top of the tubes
• Quick spin button for momentary operation
• Powerful motor quickly accelerates rotor to speed
• Well vented to maximize cool running
• Keeps samples close to ambient temp. of 4° to 35°C
• May be used in a cold room for below ambient temperatures > More

• Quick precooled Refrigeration from -20° to 40°C
• Capacity for up to 44 x 1.5/2.0ml tubes
• Lid has motorized locking system
• Induction drive can accelerate to max speed in 16 sec.
• Acceleration/deceleration can be set to 10 rates
• Imbalance identification has automatic shutoff
• Speed can be set and viewed in both rpm and rcf
• Preselected rotor code for proper g-force conversion
• One adjustment knob for easy setting of parameters
• Up to 99 sets of parameters may be stored in memory
• Quick spin button for momentary operation
• 11” wide to maximize bench space
• Easy to read LCD control panel
• Quiet operation > More

• Capacity for up to 4 x 100ml
• Preselected rotor code for proper g-force conversion
• Swing out, angled rotors for tubes, microplates, and aerosol containment
• Imbalance identification has automatic shutoff
• Digital microprocessor controls operating parameters
• Overspeed eliminated by rotor recognition program
• Induction drive can accelerate to max speed quickly
• Acceleration/deceleration can be set to 2 rates
• Runs may be timed, continuous or momentary
• Well vented to maximize cool running
• Keeps samples close to ambient temperature
• Refrigeration maintains rotors at 4ºC > More

Unlike traditional mini centrifuges, the new MyFuge 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and 4 PCR strips simultaneously. Unlike traditional mini centrifuges, the new MyFuge 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and 4 PCR strips simultaneously. With a fixed speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5500 rpm. Open the lid, and the unit quickly decelerates for removal of samples. At just 5.5 inches wide, the MyFuge 12 truly is a personal centrifuge with unmatched capacity and flexibility. > More

The MyFuge™ Mini is a personal centrifuge that virtually fits in the palm of your hand. An eight place rotor is included and comes installed. A second rotor for 0.2ml PCR tubes and strips is also included and stored with the rotor removal key in a convenient compartment on the bottom of the centrifuge. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. A second rotor for 0.2ml PCR tubes and strips is also included and stored with the rotor removal key in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. > More