Ink & Ink Pads

This fingerprint ink is specially formulated for the slab and roller. It is jet black and available in 2 or 4 ounce tubes. > More

Our slabs are made of glass or stainless steel. Both materials offer a smooth surface that allows the user to roll a perfect layer of ink for taking fingerprints. > More

These inking foils are two pieces of polyester film coated with a perfect layer of ink. To use, peel the film apart to expose the ink, then roll the fingers. Ideal for elimination prints or printing children. > More

Perfect Print® instantly develops permanent, black nonsmearing, exceptionally clear prints without the mess associated with conventional fingerprint ink methods. This ink is non-toxic and will not dry out in the pad. The ceramic pad will not deteriorate with use. Any ink residue left on the fingers is easily removed by rubbing the fingers together. > More

This pocket sized pad is accepted as the standard by law enforcement officers worldwide. Each pad may be used to record thousands of fingerprints. Each pad is impregnated with a two year supply of ink and is suitable for the field or office. The ink is non-fading and dries in seconds. Staining ink requires soap and water clean up. > More

The EZID100 and EZID200 ceramic fingerprint pads have the same quality as the full size fingerprint pads but are pocket size for portability and convenience. > More

These ink rollers are provided with comfortable, unbreakable, tapered black plastic handles that suits any hand size. When turned over, the stainless steel frame prevents the inked rubber roller from contacting the table top when not in use. > More

CERAMIC SURFACE, INKLESS
Ceramic pad surface utilizing a light ink that gives a dark, very clear, crisp imprint, leaving no ink residue on fingers. Ink dries instantly and does not smear. 1,200 imprints/pad.

THERMOPLASTIC SURFACE
Thermoplastic pad surface gives a dark, very clear, crisp imprint. Ink is easily removed from fingers. Ink dries instantly and does not smear. 1,200 imprints/pad. > More

These 8” x 8” format record cards are printed in process blue ink on 110-lb. index card stock. Designed to the specifications of U.S. Immigration and Naturalization Service. > More

CERAMIC SURFACE, INKLESS
Ceramic pad surface utilizing a light ink that gives a dark, very clear, crisp imprint, leaving no ink residue on fingers. Ink dries instantly and does not smear. 1,200 imprints/pad.

THERMOPLASTIC SURFACE
Thermoplastic pad surface gives a dark, very clear, crisp imprint. Ink is easily removed from fingers. Ink dries instantly and does not smear. 1,200 imprints/pad. > More

Live Scan Fingerprint pads will greatly enhance the ridge lines of the fingerprint. Use on glass platen computerized fingerprinting equipment for a much more enhanced fingerprint image. > More

Our latent print reference pads create perfect, consistent test latent fingerprints again and again. Simply press your finger on the desired pad and the perfect amount of latent print residue is left behind. Latent print development techniques can then be accurately tested and gauged based on this reference standard, regardless of who placed the print. > More

It is sometimes difficult to obtain legible fingerprints when using Livescan or traditional inking methods with some subjects due to occupational wear, injury, or fine friction ridge detail. ASCAN Ridge Enhancer was developed to enhance ridge detail using a new rehydration formula. Simply spray the fingertips or palms with ASCAN and have the subject rub their hands together. ASCAN will rehydrate and expand the friction ridges producing greatly improved detail in the recorded prints. ASCAN can also be utilized for the rehydration of desiccated tissues in mummified cadavers. > More