Laboratory Carts

The Carboy Caddy is a safe way to move heavy cartons and helps to eliminate heavy lifting and back strain. The 24” shelf is made of a phenolic board with a melamine high pressure laminate surface and will support loads up to 360lbs. The handle measures 38 1/2” high and 19” wide. Shipping weight is 21lbs. > More

This cart holds a variety of forensic supplies and equipment and features two removable polished type 304 stainless steel shelves. These shelves are 2” deep on three sides with one open side for easy transfer of equipment from the laboratory bench to the cart. Shipping weight is 56lbs. Dimensions 34” x 19” x 36” High > More

Our stockroom cart is a step ladder and cart in one. This cart features a sturdy two step ladder with non skid surface; conforms to OSHA and ANSI design guidelines. The sturdy two step ladder is spring loaded and skid resistant with rubber feet preventing the cart from moving while user stands on the ladder. The steps withstand loads up to 1000 lbs . This cart has two removable watertight epoxy coated steel pans with gray vinyl mats, and one vinyl coated wire basket. Shipping weight is 69lbs. Dimensions 19” x 39 1/2” x 43” High > More

Our Heavy Duty Mobile Bench is ideal for transporting supplies and equipment within the laboratory or property room. The Mobile Bench features 5” diameter non marking polyurethane casters with toe locks. Shipping weight is 111lbs. Dimensions 48” x 24” x 37” High > More

Hydraulic Lift Base Stands can be easily raised or lowered and may be used as a support for a ductless enclosure, or an adjustable height table. This tubular epoxy coated steel frame will support loads up to 1000lbs. The working height is infi nitely adjustable from 26.75” to 34.75”. Each model is supplied with a 1.25” thick chemical resistant epoxy work surface. This unit also features four powder coated die cast feet with levelers. Electric also available. > More

These polymer carts are designed to resist staining and wipe clean easily. Contains spills with an 11mm deep ship’s edge lip around shelves. Available in 2 shelf, 3 shelf, 3 shelf enclosed end, and 3 shelf, 3 sided enclosed styles. Load capacity is 150lbs per shelf and 400lbs per unit. Available in Grey, Blue, Berry, and Black. Note: Due to excessive size and weights, you will be notified after your order for the correct shipping amount. > More

These carts are durable, dependable transport solution that’s easy to maneuver. Features a highly rigid Super Erecta shelve that’s lest you easily adjust it at 1” increments. This cart system uses 2 solid stainless steel shelves, perfect for the lab. Note: Due to excessive size and weights, you will be notified after your order for the correct shipping amount. > More

Theses shelf systems feature two adjustable open-grid shelves that are adjustable at 1/2” increments. The open-grid shelf design minimizes dust and increases air circulation and visibility. The corrosion and rust proof shelves also use removable mats for easy cleaning. This makes them perfect for both the lab and property room. Come with two Swivel and two Brake Polyurethane casters. Due to the special reinforced polymers, each shelf is designed to hold up to 800lbs for 36” and 48” shelves, and 600lbs for 60” shelves. Note: You will be notified after your order for the correct shipping amount > More

Theses shelves feature two Super Adjustable 2™ Erecta wire shelves which allow for quick and easy adjustability. The open-wire shelf design minimizes dust and increases air circulation and visibility. Come with two Swivel and two Brake Polyurethane casters, which are designed to hold up to 900lbs. These shelves are ideal for property room storage. Note: You will be notified after your order for the correct shipping amount > More

Arrowhead is proud to offer the most durable and economically priced laboratory seating available on the market today. These black vinyl upholstered laboratory chairs feature pneumatic seat height adjustment, backrest tilt, contoured foam cushioned seat, 2” casters, and a back rest with kidney support. Medium and high bench height chairs have a 20” diameter adjustable height foot ring. > More